vue-hello/node_modules/node-forge/CHANGELOG.md

Forge ChangeLog

1.2.1 - 2022-01-11

Fixed

• [tests]: Load entire module to improve top-level testing and coverage reporting.
• [log]: Refactor logging setup to avoid use of URLSearchParams.

1.2.0 - 2022-01-07

Fixed

• [x509] 'Expected' and 'Actual' issuers were backwards in verification failure message.

Added

• [oid,x509]: Added OID 1.3.14.3.2.29 / sha1WithRSASignature for sha1 with RSA. Considered a deprecated equivalent to 1.2.840.113549.1.1.5 / sha1WithRSAEncryption. See discussion and links.

Changed

• [x509]: Reduce duplicate code. Add helper function to create a signature digest given an signature algorithm OID. Add helper function to verify signatures.

1.1.0 - 2022-01-06

Fixed

• [x509]: Correctly compute certificate issuer and subject hashes to match behavior of openssl.
• [pem]: Accept certificate requests with "NEW" in the label. "BEGIN NEW CERTIFICATE REQUEST" handled as "BEGIN CERTIFICATE REQUEST".

1.0.0 - 2022-01-04

Notes

• 1.0.0!
• This project is over a decade old! Time for a 1.0.0 release.
• The URL related changes may expose bugs in some of the networking related code (unrelated to the much wider used cryptography code). The automated and manual test coverage for this code is weak at best. Issues or patches to update the code or tests would be appreciated.

Removed

• SECURITY, BREAKING: Remove forge.debug API. The API has the potential for prototype pollution. This API was only briefly used by the maintainers for internal project debug purposes and was never intended to be used with untrusted user inputs. This API was not documented or advertised and is being removed rather than fixed.
• SECURITY, BREAKING: Remove forge.util.parseUrl() (and forge.http.parseUrl alias) and use the WHATWG URL Standard. URL is supported by modern browers and modern Node.js. This change is needed to address URL parsing security issues. If forge.util.parseUrl() is used directly or through forge.xhr or forge.http APIs, and support is needed for environments without URL support, then a polyfill must be used.
• BREAKING: Remove forge.task API. This API was never used, documented, or advertised by the maintainers. If anyone was using this API and wishes to continue development it in other project, please let the maintainers know. Due to use in the test suite, a modified version is located in tests/support/.
• BREAKING: Remove forge.util.makeLink, forge.util.makeRequest, forge.util.parseFragment, forge.util.getQueryVariables. Replace with URL, URLSearchParams, and custom code as needed.

Changed

• BREAKING: Increase supported Node.js version to 6.13.0 for URL support.
• BREAKING: Renamed master branch to main.
• BREAKING: Release process updated to use tooling that prefixes versions with v. Other tools, scripts, or scanners may need to adapt.
• BREAKING: Remove docs related to Bower and forge-dist. Install using another method.

Added

• OIDs for surname, title, and givenName.

Fixed

• BREAKING: OID 2.5.4.5 name fixed from serialName to serialNumber. Depending on how applications used this id to name association it could cause compatibility issues.

0.10.0 - 2020-09-01

Changed

• BREAKING: Node.js 4 no longer supported. The code may still work, and non-invasive patches to keep it working will be considered. However, more modern tools no longer support old Node.js versions making testing difficult.

Removed

• BREAKING: Remove util.getPath, util.setPath, and util.deletePath. util.setPath had a potential prototype pollution security issue when used with unsafe inputs. These functions are not used by forge itself. They date from an early time when forge was targeted at providing general helper functions. The library direction changed to be more focused on cryptography. Many other excellent libraries are more suitable for general utilities. If you need a replacement for these functions, consider get, set, and unset from lodash. But also consider the potential similar security issues with those APIs.

0.9.2 - 2020-09-01

Changed

• Added util.setPath security note to function docs and to README.

Notes

• SECURITY: The util.setPath function has the potential to cause prototype pollution if used with unsafe input.
  • This function is not used internally by forge.
  • The rest of the library is unaffected by this issue.
  • Do not use unsafe input with this function.
  • Usage with known input should function as expected. (Including input intentionally using potentially problematic keys.)
  • No code changes will be made to address this issue in 0.9.x. The current behavior could be considered a feature rather than a security issue. 0.10.0 will be released that removes util.getPath and util.setPath. Consider get and set from lodash if you need replacements. But also consider the potential similar security issues with those APIs.
  • https://snyk.io/vuln/SNYK-JS-NODEFORGE-598677
  • https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-7720

0.9.1 - 2019-09-26

Fixed

• Ensure DES-CBC given IV is long enough for block size.

0.9.0 - 2019-09-04

Added

• Add ed25519.publicKeyFromAsn1 and ed25519.privateKeyFromAsn1 APIs.
• A few OIDs used in EV certs.

Fixed

• Improve ed25519 NativeBuffer check.

0.8.5 - 2019-06-18

Fixed

• Remove use of const.

0.8.4 - 2019-05-22

Changed

• Replace all instances of Node.js new Buffer with Buffer.from and Buffer.alloc.

0.8.3 - 2019-05-15

Fixed

• Use basic character set for code.

0.8.2 - 2019-03-18

Fixed

• Fix tag calculation when continuing an AES-GCM block.

Changed

• Switch to eslint.

0.8.1 - 2019-02-23

Fixed

• Fix off-by-1 bug with kem random generation.

0.8.0 - 2019-01-31

Fixed

• Handle creation of certificates with notBefore and notAfter dates less than Jan 1, 1950 or greater than or equal to Jan 1, 2050.

Added

• Add OID 2.5.4.13 "description".
• Add OID 2.16.840.1.113730.1.13 "nsComment".
  • Also handle extension when creating a certificate.
• pki.verifyCertificateChain:
  • Add validityCheckDate option to allow checking the certificate validity period against an arbitrary Date or null for no check at all. The current date is used by default.
• tls.createConnection:
  • Add verifyOptions option that passes through to pki.verifyCertificateChain. Can be used for the above validityCheckDate option.

Changed

• Support WebCrypto API in web workers.
• rsa.generateKeyPair:
  • Use crypto.generateKeyPair/crypto.generateKeyPairSync on Node.js if available (10.12.0+) and not in pure JS mode.
  • Use JS fallback in rsa.generateKeyPair if prng option specified since this isn't supported by current native APIs.
  • Only run key generation comparison tests if keys will be deterministic.
• PhantomJS is deprecated, now using Headless Chrome with Karma.
• Note: Using Headless Chrome vs PhantomJS may cause newer JS features to slip into releases without proper support for older runtimes and browsers. Please report such issues and they will be addressed.
• pki.verifyCertificateChain:
  • Signature changed to (caStore, chain, options). Older (caStore, chain, verify) signature is still supported. New style is to to pass in a verify option.

0.7.6 - 2018-08-14

Added

• Test on Node.js 10.x.
• Support for PKCS#7 detached signatures.

Changed

• Improve webpack/browser detection.

0.7.5 - 2018-03-30

Fixed

• Remove use of const.

0.7.4 - 2018-03-07

Fixed

• Potential regex denial of service in form.js.

Added

• Support for ED25519.
• Support for baseN/base58.

0.7.3 - 2018-03-05

• Re-publish with npm 5.6.0 due to file timestamp issues.

0.7.2 - 2018-02-27

Added

• Support verification of SHA-384 certificates.
• 1.2.840.10040.4.3'/dsa-with-sha1 OID.

Fixed

• Support importing PKCS#7 data with no certificates. RFC 2315 sec 9.1 states certificates are optional.
• asn1.equals loop bug.
• Fortuna implementation bugs.

0.7.1 - 2017-03-27

Fixed

• Fix digestLength for hashes based on SHA-512.

0.7.0 - 2017-02-07

Fixed

• Fix test looping bugs so all tests are run.
• Improved ASN.1 parsing. Many failure cases eliminated. More sanity checks. Better behavior in default mode of parsing BIT STRINGs. Better handling of parsed BIT STRINGs in toDer(). More tests.
• Improve X.509 BIT STRING handling by using new capture modes.

Changed

• Major refactor to use CommonJS plus a browser build system.
• Updated tests, examples, docs.
• Updated dependencies.
• Updated flash build system.
• Improve OID mapping code.
• Change test servers from Python to JavaScript.
• Improve PhantomJS support.
• Move Bower/bundle support to forge-dist.
• BREAKING: Require minimal digest algorithm dependencies from individual modules.
• Enforce currently supported bit param values for byte buffer access. May be BREAKING for code that depended on unspecified and/or incorrect behavior.
• Improve asn1.prettyPrint() BIT STRING display.

Added

• webpack bundler support via npm run build:
  • Builds .js, .min.js, and basic sourcemaps.
  • Basic build: forge.js.
  • Build with extra utils and networking support: forge.all.js.
  • Build WebWorker support: prime.worker.js.
• Browserify support in package.json.
• Karma browser testing.
• forge.options field.
• forge.options.usePureJavaScript flag.
• forge.util.isNodejs flag (used to select "native" APIs).
• Run PhantomJS tests in Travis-CI.
• Add "Donations" section to README.
• Add IRC to "Contact" section of README.
• Add "Security Considerations" section to README.
• Add pbkdf2 usePureJavaScript test.
• Add rsa.generateKeyPair async and usePureJavaScript tests.
• Add .editorconfig support.
• Add md.all.js which includes all digest algorithms.
• Add asn1 equals() and copy().
• Add asn1 validate() capture options for BIT STRING contents and value.

Removed

• BREAKING: Can no longer call forge({...}) to create new instances.
• Remove a large amount of old cruft.

Migration from 0.6.x to 0.7.x

• (all) If you used the feature to create a new forge instance with new configuration options you will need to rework your code. That ability has been removed due to implementation complexity. The main rare use was to set the option to use pure JavaScript. That is now available as a library global flag forge.options.usePureJavaScript.
• (npm,bower) If you used the default main file there is little to nothing to change.
• (npm) If you accessed a sub-resource like forge/js/pki you should either switch to just using the main forge and access forge.pki or update to forge/lib/pki.
• (bower) If you used a sub-resource like forge/js/pki you should switch to just using forge and access forge.pki. The bower release bundles everything in one minified file.
• (bower) A configured workerScript like /bower_components/forge/js/prime.worker.js will need to change to /bower_components/forge/dist/prime.worker.min.js.
• (all) If you used the networking support or flash socket support, you will need to use a custom build and/or adjust where files are loaded from. This functionality is not included in the bower distribution by default and is also now in a different directory.
• (all) The library should now directly support building custom bundles with webpack, browserify, or similar.
• (all) If building a custom bundle ensure the correct dependencies are included. In particular, note there is now a md.all.js file to include all digest algorithms. Individual files limit what they include by default to allow smaller custom builds. For instance, pbdkf2.js has a sha1 default but does not include any algorithm files by default. This allows the possibility to include only sha256 without the overhead of sha1 and sha512.

Notes

• This major update requires updating the version to 0.7.x. The existing work-in-progress "0.7.x" branch will be painfully rebased on top of this new 0.7.x and moved forward to 0.8.x or later as needed.
• 0.7.x is a start of simplifying forge based on common issues and what has appeared to be the most common usage. Please file issues with feedback if the changes are problematic for your use cases.

0.6.x - 2016 and earlier

• See Git commit log or https://github.com/digitalbazaar/forge.